Designed to get you there bigger and higher. The Highlife has the most amount of rocker and bottom features of any Ronix board and is designed for bigger boost on air tricks and leaving a kicker. A more rigid mid section so a rider can rock into a press – once locked in - a softer end tip/tail section creates more ability to move side-to-side or exaggerate the angle of a press.
Riding Style: Park//Advanced
Profile: Flexbox 2
Flex: Press: Soft Tip/Tail
• FlexBox 2
• G&R Technology
• Vertical wood in the center / horizontal wood in the tip and tail
• Sintered base
• Ridden by Guy Firer
We came to a point where not everybody was happy with one traditional flex zone because of their personal riding styles. So we analyzed how a broad range of riders ollie, flex, and release off the water and features. The result was we need to have some boards with pressure points in the center, and others in the tip/tail.
Vertical poured urethane creates more top water speed and a durable bumper from those floating menaces at a cable park.
Vertical wood in the center / horizontal wood in the tip and tail
Several of our boards are made out of a similar wood – but they differ in the grain direction. Sometimes the goal of a board is to have a softer mid section so we have the wood running horizontally vice versa for a stiffer belly. Same goes for the ends of the board. No two wood board series are made with the same grain layup.
The most durable non-stick base material we have ever tested on features, and has increased glide speed on the water. Our exclusive base was formulated from a powder by heating the material in a sintering furnace above its melting point until the particles bond to one another. A higher purity compound that preserves its bond overtime. No obstacle is safe at cable parks with our jib friendly base material.